About C-Tech
Capabilities
Contact UsPRODUCT #001
12ft Skiffs
Mast Features: Plastic track bonded, halyard slots top and bottom, 5mm carbon plate to accept mainsail shackle and spin halyard sheave shackle, reinforcement for hounds and mast-step, heel plate with rectangular key way, 2 sets of carbon spreaders either on bands or glued and bonded in place (excludes standing rigging)
Enquire| Product | Details |
|---|---|
| HM Mast Complete #1 | 66.5 x 52mm ID @ 8000mm long - oval section |
| HM Mast Complete #2 | 54mm ID @ 7000mm long - oval section |
| HM Mast Complete #3 | 48mm ID @ 6200mm long - oval section |
| Boom #1 | 110mm x 75mm, parallel - oval Section |
| Prod Complete #1 | Up to 3600mm, 5 spreaders, wire and blocks |
| Prod Complete #2 | Up to 3000mm, 3 spreaders, wire and blocks |
| Centreboards | 305mm x 32mm x 1600mm |
| Rudders | 255mm x 32mm x 1500mm |
PRODUCT #002
Int. 14
C-Tech masts for the Int. 14 are manufactured using light weight, super reactive UHM carbon fibre.
Mast Sections| Product | Details |
|---|---|
| High Modulus Mast Complete | 58mm ID x 7850mm (includes fixed spreaders) |
| High Modulus Mast Section | 66.5 x 52mm ID @ 7850mm long with track (bare section) |
| Set Of Carbon Spreaders | On band (fixed), up to 600mm long, weight approximately 250g |
| Boom Sections | 110mm x 75mm parallel (oval or round - 80/90/100mm ID) |
PRODUCT #003
16ft Skiffs
C-Tech has several oval profiles suitable for carbon 16ft skiff booms. Carbon #1 and #2 prods are also available from C-Tech. Feedback from Australia on the masts is that the boats are higher and faster with a C-Tech rig.
| Product | Details |
|---|---|
| HM Mast Complete #1 | 58mm ID @ 8500mm |
| HM Mast Complete #2 | 58mm ID @ 7400mm |
| HM Boom #1 | 100mm x 50mm @ 2850 - rectangle |
| HM Boom #2 | 120mm x 88mm ID @ 2850mm - oval |
| Prod #1 | 40mm ID @ 2510mm |
PRODUCT #004
18ft Skiff
Masts are supplied in 2 pieces, with the tip pre-fitted and ready to join on arrival. Carbon fibre spreaders can be supplied on bands, ready to be attached on arrival. Laminates are adjusted for individual crew weights. C-Tech's 18ft Skiff components are manufactured from pre-preg carbon fibre.
| Product | Details |
|---|---|
| HM Mast Complete #1 | 76mm x 62mm @ 10380mm - oval section |
| HM Mast Complete #2 (NEW) | 91mm x 62mm @ 10380mm - oval section (700gms lighter than #1) |
| HM Mast Complete #3 | 66.5mm x 52mm @ 9350 - oval section |
| HM Boom #1 | 160mm x 100mm ID @ 3800mm - oval section |
| HM Boom #2 | 150mm x 75mm @ 3800mm - rectangle section |
| HM Prod | 50mm ID @ 3400mm - tapered laminate, tapered tip |
| SM Centerboard & Rudder | Hollow construction with integrated sheer webs |
| HM Wing Tube Kit | 2 outer bars, 2 inner bars, 4 struts and 4800mm sissy bar |
| Tiller Extension | 19mm ID or 22mm ID @ 3600mm |
Latest Skiffs News
C-Tech Results Board:
| Event | Year | Results | Sailor | Product |
|---|
+64 9 810 8406
orders@c-tech.co.nz
551 Rosebank Rd, Avondale, Auckland 1026
Pages
C-Tech
Links
Subscribe to our Newsletter!
